DURABLE HOPPER CONSTRUCTION

The 8700 has two main hopper size options; the 8708 with an 8-ton hopper and the 8711 with an 11-ton hopper. The 8708 has 260 cubic feet of total capacity with the option to split the hopper with a 60 cubic foot hopper with a 200 cubic foot main hopper. The 8711 features 357 cubic feet of total capacity with the option to add a 60 cubic foot micro hopper with a 297 cubic foot main hopper. Higher capacity hoppers allow for you to cover more acres with less downtime for fill ups. The hopper itself is constructed of corrosion-resistant, painted 409 stainless steel and comes with a roll tarp installed.

ACCURATE METERING OPTIONS

The Valmar 8700 can be configured with either a ground-driven or hydraulic metering system. The ground-driven system, which is standard on the 8708, uses an accurate 60-speed gearbox which allow for rate adjustments in 5% increments for precise application with a wide variety of granular products. Left/right metering section control can be manually operated from the cab to minimize overlap throughout the field. The ground-driven system is not available for the 8711. The hydraulic-driven metering system, which is standard on the 8711 and optional on the 8708, can automate the left/right hand control and allows for variable rate application using ISOBUS control through a third-party rate controller.

The 8700 also has the option to add a second metering system with a micro hopper. Using a 28-groove metering roller allows for precise application of granular herbicide, seed, or micronutrients at the same rate as you apply fertilizer.

RUGGED BOOM DESIGN

The Valmar 8700 features 60-foot booms on the 8708 and 72-foot booms on the 8711. Using hydraulic fold booms built with high-quality 304 stainless steel allows the 8700 booms to stand up to the abrasive nature of granular fertilizer application. These booms are equipped with rubber torsion suspension, which do not require any service and reduce friction, bouncing, and wear of the booms while operating at higher speeds. Hydraulic folding, 7-foot break-away boom tips are also implemented on the 8600 to minimize damage that may occur from striking obstacles in the field.

The left and right boom are supplied independently for the greatest application accuracy, and allowing for left/right right section control in hydraulically driven and mechanically driven machines.

ADJUSTABLE AXLE WIDTHS TO FIT ANY CROP

Originally designed to meet the needs of row crop farmers, the 8700 features axles which can be adjusted from 72 inches up to 120 inches with the wide adjustable axle option and row crop tires to accommodate most row spacings. In addition, the 8700 can be equipped with optional tire sizes to achieve greater flotation or narrower tracking, depending on the crop and/or the tractor pulling the implement.

SIDE DRESSING WITH DROP TUBES

The Valmar 8708 with 60-foot booms allows for use of drop tubes on 30-inch centers for post emergence application of nutrients or interseeding cover crops into standing crops when paired with narrow row crop tires. This allows you to spoon feed nutrients to the plant throughout the growing season while keeping granular fertilizers out of the whirl of the corn crop, which can cause potential plant damage. For spring or fall application, the drop tube kit can be taken off and replaced with deflectors for broadcast application.